Chemical Warfare Agents Detoxification Properties of Zirconium Metal-Organic Frameworks by Synergistic Incorporation of Nucleophilic and Basic Sites.

The development of protective self-detoxifying materials is an important societal challenge to counteract risk of attacks employing highly toxic chemical warfare agents (CWAs). In this work, we have developed bifunctional zirconium metal-organic frameworks (MOFs) incorporating variable amounts of nucleophilic amino residues by means of formation of the mixed ligand [Zr6O4(OH)4(bdc)6(1-x)(bdc-NH2)6x] (UiO-66-xNH2) and [Zr6O4(OH)4(bpdc)6(1-x)(bpdc-(NH2)2)6x] (UiO-67-x(NH2)2) systems where bdc = benzene-1,4-dicarboxylate; bdc-NH2= benzene-2-amino-1,4-dicarboxylate; bpdc = 4,4'-biphenyldicarboxylate; bpdc-(NH2)2 = 2,2'-diamino-4,4'-biphenyldicarboxylate and x = 0, 0.25, 0.5, 0.75, 1. In a second step, the UiO-66-xNH2 and UiO-67-x(NH2)2 systems have been postsynthetically modified by introduction of highly basic lithium tert-butoxide (LiOtBu) on the oxohydroxometallic clusters of the mixed ligand MOFs to yield UiO-66-xNH2@LiOtBu and UiO-67-x(NH2)2@LiOtBu materials. The results show that the combination of pre and postsynthetic modifications on these MOF series gives rise to fine-tuning of the catalytic activity toward the hydrolytic degradation of both simulants and real CWAs in unbuffered aqueous solutions. Indeed, UiO-66-0.25NH2@LiOtBu is able to hydrolyze both CWAs simulants (diisopropylfluorophosphate (DIFP), 2-chloroethylethylsulfide (CEES), and real CWAs (soman (GD), sulfur mustard (HD)) quickly in aqueous solution. These results are related to a suitable combination of robustness, nucleophilicity, basicity, and accessibility to the porous framework.

Selective sulfur dioxide adsorption on crystal defect sites on an isoreticular metal organic framework series.

The widespread emissions of toxic gases from fossil fuel combustion represent major welfare risks. Here we report the improvement of the selective sulfur dioxide capture from flue gas emissions of isoreticular nickel pyrazolate metal organic frameworks through the sequential introduction of missing-linker defects and extra-framework barium cations. The results and feasibility of the defect pore engineering carried out are quantified through a combination of dynamic adsorption experiments, X-ray diffraction, electron microscopy and density functional theory calculations. The increased sulfur dioxide adsorption capacities and energies as well as the sulfur dioxide/carbon dioxide partition coefficients values of defective materials compared to original non-defective ones are related to the missing linkers enhanced pore accessibility and to the specificity of sulfur dioxide interactions with crystal defect sites. The selective sulfur dioxide adsorption on defects indicates the potential of fine-tuning the functional properties of metal organic frameworks through the deliberate creation of defects.

1D-2D-3D Transformation Synthesis of Hierarchical Metal-Organic Framework Adsorbent for Multicomponent Alkane Separation.

A new hierarchical MOF consisting of Cu(II) centers connected by benzene-tricarboxylates (BTC) is prepared by thermoinduced solid transformation of a dense CuBTC precursor phase. The mechanism of the material formation has been thoroughly elucidated and revealed a transformation of a ribbon-like 1D building unit into 2D layers and finally a 3D network. The new phase contains excess copper, charge compensated by systematic hydroxyl groups, which leads to an open microporous framework with tunable permanent mesoporosity. The new phase is particularly attractive for molecular separation. Energy consumption of adsorptive separation processes can be lowered by using adsorbents that discriminate molecules based on adsorption entropy rather than enthalpy differences. In separation of a 11-component mixture of C1-C6 alkanes, the hierarchical phase outperforms the structurally related microporous HKUST-1 as well as silicate-based hierarchical materials. Grand canonical Monte Carlo (GCMC) simulation provides microscopic insight into the structural host-guest interaction, confirming low adsorption enthalpies and significant entropic contributions to the molecular separation. The unique three-dimensional hierarchical structure as well as the systematic presence of Cu(II) unsaturated coordination sites cause this exceptional behavior.

Modelling a Linker Mix-and-Match Approach for Controlling the Optical Excitation Gaps and Band Alignment of Zeolitic Imidazolate Frameworks.

Tuning the electronic structure of metal-organic frameworks is the key to extending their functionality to the photocatalytic conversion of absorbed gases. Herein we discuss how the band edge positions in zeolitic imidazolate frameworks (ZIFs) can be tuned by mixing different imidazole-based linkers within the same structure. We present the band alignment for a number of known and hypothetical Zn-based ZIFs with respect to the vacuum level. Structures with a single type of linker exhibit relatively wide band gaps; however, by mixing linkers of a low-lying conduction edge with linkers of a high-lying valence edge, we can predict materials with ideal band positions for visible-light water splitting and CO2 reduction photocatalysis. By introducing copper in the tetrahedral position of the mixed-linker ZIFs, it would be possible to increase both photo-absorption and the electron-hole recombination times.

Textile/metal-organic-framework composites as self-detoxifying filters for chemical-warfare agents.

The current technology of air-filtration materials for protection against highly toxic chemicals, that is, chemical-warfare agents, is mainly based on the broad and effective adsorptive properties of hydrophobic activated carbons. However, adsorption does not prevent these materials from behaving as secondary emitters once they are contaminated. Thus, the development of efficient self-cleaning filters is of high interest. Herein, we report how we can take advantage of the improved phosphotriesterase catalytic activity of lithium alkoxide doped zirconium(IV) metal-organic framework (MOF) materials to develop advanced self-detoxifying adsorbents of chemical-warfare agents containing hydrolysable P-F, P-O, and C-Cl bonds. Moreover, we also show that it is possible to integrate these materials onto textiles, thereby combining air-permeation properties of the textiles with the self-detoxifying properties of the MOF material.

ε-Keggin-based coordination networks: Synthesis, structure and application toward green synthesis of polyoxometalate@graphene hybrids.

Four coordination networks based on the {ε-PMo(V)(8)Mo(VI)(4)O(40)(OH)(4)Zn(4)} Keggin unit (εZn) have been synthesized under hydrothermal conditions. (TBA)(3){PMo(V)(8)Mo(VI)(4)O(36)(OH)(4)Zn(4)}[C(6)H(4)(COO)(2)](2) (ε(isop)(2)) is a 2D material with monomeric εZn units connected via 1,3 benzenedicarboxylate (isop) linkers and tetrabutylammonium (TBA) counter-cations lying between the planes. In (TPA)(3){PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)}[C(6)H(3)(COO)(3)] (TPA[ε(trim)](∞)), 1D inorganic chains formed by the connection of εZn POMs, via Zn-O bonds, are linked via 1,3,5 benzenetricarboxylate (trim) ligands into a 2D compound with tetrapropylammonium (TPA) cations as counter-cations. (TBA){PMo(V)(8)Mo(VI)(4)O(40)Zn(4)}(C(7)H(4)N(2))(2)(C(7)H(5)N(2))(2)·12H(2)O (ε(bim)(4)) is a molecular material with monomeric εZn POMs bound to terminal benzimidazole (bim) ligands. Finally, (TBA)(C(10)H(10)N(4))(2)(HPO(3)){PMo(V)(8)Mo(VI)(4)O(40)Zn(4)}(2)(C(10)H(9)N(4))(3)(C(10)H(8)N(4)) (ε(2)(pazo)(4)) is a 1D compound with dimeric (εZn)(2) POMs connected by HPO(3)(2-) ions and terminal para-azobipyridine (pazo) ligands. In this compound an unusual bond cleavage of the central N[double bond, length as m-dash]N bond of the pazo ligand is observed. We report also a green chemistry-type one-step synthesis method carried out in water at room temperature using ε(2)(pazo)(4) and ε(isop)(2) as reducing agent of graphite oxide (GO) to obtain graphene (G). The POM@G hybrids were characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, powder X-ray diffraction, energy dispersive X-ray analysis, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and cyclic voltammetry.

Polyoxometalates functionalized by bisphosphonate ligands: synthesis, structural, magnetic, and spectroscopic characterizations and activity on tumor cell lines.

We report the synthesis and characterization of eight new Mo, W, or V-containing polyoxometalate (POM) bisphosphonate complexes with metal nuclearities ranging from 1 to 6. The compounds were synthesized in water by treating Mo(VI), W(VI), V(IV), or V(V) precursors with biologically active bisphosphonates H(2)O(3)PC(R)(OH)PO(3)H(2) (R = C(3)H(6)NH(2), Ale; R = CH(2)S(CH(3))(2), Sul and R = C(4)H(5)N(2), Zol, where Ale = alendronate, Sul = (2-Hydroxy-2,2-bis-phosphono-ethyl)-dimethyl-sulfonium and Zol = zoledronate). Mo(6)(Sul)(2) and Mo(6)(Zol)(2) contain two trinuclear Mo(VI) cores which can rotate around a central oxo group while Mo(Ale)(2) and W(Ale)(2) are mononuclear species. In V(5)(Ale)(2) and V(5)(Zol)(2) a central V(IV) ion is surrounded by two V(V) dimers bound to bisphosphonate ligands. V(6)(Ale)(4) can be viewed as the condensation of one V(5)(Ale)(2) with one additional V(IV) ion and two Ale ligands, while V(3)(Zol)(3) is a triangular V(IV) POM. These new POM bisphosphonates complexes were all characterized by single-crystal X-ray diffraction. The stability of the Mo and W POMs was studied by (31)P NMR spectroscopy and showed that all compounds except the mononuclear Mo(Ale)(2) and W(Ale)(2) were stable in solution. EPR measurements performed on the vanadium derivatives confirmed the oxidation state of the V ions and evidenced their stability in aqueous solution. Electrochemical studies on V(5)(Ale)(2) and V(5)(Zol)(2) showed reduction of V(V) to V(IV), and magnetic susceptibility investigations on V(3)(Zol)(3) enabled a detailed analysis of the magnetic interactions. The presence of zoledronate or vanadium correlated with the most potent activity (IC(50)~1-5 µM) against three human tumor cell lines.

Polyoxometalate-based metal organic frameworks (POMOFs): structural trends, energetics, and high electrocatalytic efficiency for hydrogen evolution reaction.

The grafting of the triangular 1,3,5-benzene tricarboxylate linkers (denoted trim) on tetrahedral ε-Keggin polyoxometalates (POMs) capped by Zn(II) ions, formed in situ under hydrothermal conditions, has generated three novel POM-based metal organic frameworks (POMOFs). (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(36)(OH)(4)Zn(4)][C(6)H(3)(COO)(3)](4/3)·6H(2)O (ε(trim)(4/3)) is a 3D open-framework built of molecular Keggin units connected by trim linkers, with channels occupied by tetrabutylammonium (TBA) counterions. ε(trim)(4/3) is a novel (3,4)-connected net, named ofp for open-framework polyoxometalate, and computer simulations have been used to evaluate its relative stability in comparison with ctn- and bor-like polymorphs, showing the stability of this novel phase directly related to its greatest density. A computational study was also undertaken with the aim of locating TBA molecules, the positions of which could not be deduced from single crystal X-ray diffraction, and further rationalizes their structure directing role. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)] (ε(2)(trim)(2)), the building unit is not the molecular Keggin but a dimerized form of this POM. Their connection via trim linkers generates a 3D framework with channels filled by TBA cations. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)]·8H(2)O ([ε(trim)](∞)), zigzag chains are connected via the organic linkers, forming 2D grids. Modified electrodes were fabricated by direct adsorption of the POMOFs on glassy carbon or entrapment in carbon paste (CPE). A remarkable electrocatalytic hydrogen evolution reaction (HER) was detected with a yield greater than 95%, and a turnover number as high as 1.2 × 10(5) was obtained after 5 h. The reported POMOF-based electrodes are more active than platinum, with a roughly 260 mV anodic shift. Finally, the electrocatalytic activities of ε(trim)(4/3)/CPE electrodes in various XCl (X = Li, Na, K, Cs) media have been studied. This allowed us to detect a cation effect and propose an electrocatalytic mechanistic pathway for the HER.

Zeolitic polyoxometalates metal organic frameworks (Z-POMOF) with imidazole ligands and epsilon-Keggin ions as building blocks; computational evaluation of hypothetical polymorphs and a synthesis approach.

We investigate here a new family of zeolitic Metal Organic Frameworks (MOFs) based on imidazole (im) as the ligand and epsilon-type Keggin PolyOxoMetalates (POMs) as building units. The POM used in this study is the epsilon-{PMo(12)O(40)} Keggin isomer capped by four Zn(ii) ions (noted epsilon-Zn) in tetrahedral coordination. We describe here our methods to first construct and then evaluate the stability of hypothetical 3-D POMOFs possessing a tetrahedral network, typified by dense silica polymorphs and zeotypes and referred here to as Z-POMOFs. We use the analogy between the connectivity of silicon ion in dense minerals or zeolites and the epsilon-Zn, using imidazolate ligands to mimic the role of oxygen atoms in zeolites. Handling the epsilon-Keggin and imidazole as the constitutive building-blocks, a selection of 40 polymorphs were constructed and their relative stabilities computed. Among these Z-POMOFs, the cristobalite-like and zni-structure were identified as the most stable candidates. In parallel, we have attempted to synthesize Z-POMOF structures with epsilon-Zn POMs, synthesized in situ under hydrothermal conditions, and imidazole ligands. We present our first experimental result, the extended material [NBu(4)][PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)(im)(Him)], named epsilon(im)(2). The structure of the hybrid framework is built by the connection of dimerized epsilon-Zn POMs to imidazole ligands in two directions. The obtaining of the first POMOF based on imidazole ligand is an encouraging step towards the synthesis of a new family of POMOFs.

Zeolitic polyoxometalate-based metal-organic frameworks (Z-POMOFs): computational evaluation of hypothetical polymorphs and the successful targeted synthesis of the redox-active Z-POMOF1.

The targeted design and simulation of a new family of zeolitic metal-organic frameworks (MOFs) based on benzenedicarboxylate (BDC) as the ligand and epsilon-type Keggin polyoxometalates (POMs) as building units, named here Z-POMOFs, have been performed. A key feature is the use of the analogy between the connectivity of silicon in dense minerals and zeolites with that of the epsilon-type Keggin POMs capped with Zn(II) ions. Handling the epsilon-Keggin as a building block, a selection of 21 zeotype structures, together with a series of dense minerals were constructed and their relative stabilities computed. Among these Z-POMOFs, the cristobalite-like structure was predicted to be the most stable structure. This prediction has been experimentally validated by the targeted synthesis of the first experimental Z-POMOF structure, which was strikingly found to possess the cristobalite topology, with three interpenetrated networks. Crystals of [NBu(4)](3)[PMo(V)(8)Mo(VI)(4)O(36)(OH)(4)Zn(4)(BDC)(2)].2H(2)O (Z-POMOF1) have been isolated under hydrothermal conditions from the reduction of ammonium heptamolybdate in the presence of phosphorous acid and Zn(II) ions. Tetrabutylammonium cations play the role of counterions and space-filling agents in this tridimensional interpenetrated framework. Moreover, the electrochemistry of the epsilon-Keggin POM is maintained and can be exploited in the insoluble Z-POMOF1 framework, as demonstrated by the electrocatalytic reduction of bromate.